The Fleece Fuel Distribution Block Hose & Fitting Kit allows you to cleanly plumb the dual CP3 system in your Dodge 6.7L Cummins. This kit comes complete with all of the high-quality AN fittings and push-lock hose needed to route the fuel system from your Fleece Fuel Distribution Block (sold separately).
The Smashed Performance Fuel Rail Plug (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve.
The Fleece FPE-FFD-RO-4G Fuel Filter Delete for your Dodge 6.7L Cummins allows for complete removal of the factory fuel filter with the use of an aftermarket fuel filtration system such as an Airdog or FASS. With an aftermarket fuel system that bypasses the factory fuel filter, the old filter becomes an eye sore and unneeded clutter under the hood of your truck. The Fleece Fuel Filter Delete mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/18-18 O-ring port for a dual* CP3 return line.
The PPE Fuel Rail Plug (heat treated SS construction) replaces stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during full throttle driving by completely blocking the pressure relief port (effectively deadheading the fuel rail).
The Fleece FPE-FFD-RF-4G Fuel Distribution Block for your Dodge 6.7L Cummins allows for an easy upgrade of your modified fuel system. If you have an aftermarket fuel filtration system such as an Air Dog® or a FASS® and dual CP3 pumps, this fuel distribution block will allow you to get rid of your unnecessary factory fuel filter and give you a convenient and clean location to route your feeds, returns, and sensors. It mounts in the factory fuel filter location to allow you to use your factory return lines without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor, a 9/16-18 o-ring port (dual CP3 return port), (3) 3/4-16 o-ring ports (feed ports), and (2) 1/8” NPT ports (sensor ports).
The Fleece FPE-CRR-20-0806 Regulated Return Fuel Distribution Block for your Dodge 6.7L Cummins takes your fuel system to the next level. This Fuel Distribution Block features a fully integrated high-flow pressure regulator. This feature in combination with high flow aftermarket electric fuel pumps without built in pressure regulation provides more consistent fuel pressure at the CP3.
The Fleece FPE-34143 Water In Fuel Sensor Plug eliminates the factory WIF Sensor in your Dodge 5.9L/6.7L Cummins when running the Fleece Performance Fuel Filter Delete.
The Fleece Fuel Distribution Block Hose & Fitting Kit allows you to cleanly plumb the dual CP3 system in your 2007.5-2009 Dodge 6.7L Cummins. This kit comes complete with all of the high-quality AN fittings and push-lock hose needed to route the fuel system from your Fleece Fuel Distribution Block (sold separately).
The perfect companion to the PPE Fuel Rail Plug is this Viton O-Ring. It is made from high quality, chemical resistant Viton rubber. This ring is better than the stock o-ring and will last longer, too!
Clean up the underhood of your 2007.5-2009 Dodge 6.7L Cummins with the Fleece FPE-FFD-RO-3G-67 Fuel Filter Delete. If you have an aftermarket fuel filtration system such as an Air Dog or a FASS, your factory fuel filter is no longer necessary. The factory fuel filter only becomes an extra restriction and an eye sore. This fuel filter delete will remove that restriction and help clean up under the hood of your truck. It mounts perfectly to allow the factory fuel return lines to be used without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
Upgrade the fuel system on your 2007.5-2009 Dodge 6.7L Cummins with the Fleece FPE-FFD-RF-3G-67 Fuel Distribution Block. If you have an aftermarket fuel filtration system such as an Air Dog® or a FASS® and dual CP3 pumps, this fuel block will allow you to get rid of your unnecessary factory fuel filter and give you a convenient and clean location to route your feeds, returns, and sensors. It mounts in the factory fuel filter location to allow you to use your factory return lines without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor, a 9/16-18 o-ring port (dual CP3 return port), (3) 3/4-16 o-ring ports (feed ports), and (2) 1/8” NPT ports (sensor ports).
The Fleece FPE-34197 Fuel Rail Fitting Adapter is designed for use on your 6.7L Cummins.
Clean up the underhood of your Dodge 6.7L Cummins by eliminating the factory fuel filter canister with the Smashed Performance Fuel Filter Delete. Designed for use with aftermarket fuel systems like AirDog, or FASS, the Smashed Performance Fuel Filter Delete easily eliminates your factory fuel filter.