The Edge Products 98620 EAS Expandable EGT Probe With Lead allows you to monitor exhaust gas temperatures with your Edge Product CS, CTS, CS2 and CTS2. The Expandable designed allows you to add optional expandable accessories from Edge Products such as pressure and temp sensors. This re-designed version of the original EAS Starter Kit EGT Probe, is built with a 15" lead so that the EGT Probe can be easily replaced, or removed without needing to replace the cable or other electronics.

The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage them from the CTS. Due to the easily customizable software you can name your accessory right on the screen and power your accesory right from your CTS Monitor.

The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. With the EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.

The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.

Note: EAS Starter Kits are only available to work with the CS and CTS product lines. In order to use the EAS accessories you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603).

Edge’s EAS Pressure Sensor is a 0 - 100 PSIg 1/8” NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edge’s Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edge’s Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.

Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.

Easily change custom tunes from the Insight CS2 or CTS2 monitor in your Dodge Ram 6.7L Cummins with the Edge Products 98652 EAS Shift-On-The-Fly Accessory. Forget having to drill a hole in your dash for a manual switch. Tunes can be conveniently changed right from the screen of your Insight. Many tuning companies utilize a voltage signal to prompt a custom tune level change. Edge has designed this product to produce voltage signals between 1v, 2v, 3v, 4v, and 5v, right from your Insight, allowing for tune changes without the need for a separate switch.

Easily change custom tunes from the Insight CS2 or CTS2 monitor in your Ford 6.7L Powerstroke with the Edge Products 98651 EAS Shift-On-The-Fly Accessory. Forget having to drill a hole in your dash for a manual switch. Tunes can be conveniently changed right from the screen of your Insight. Many tuning companies utilize a voltage signal to prompt a custom tune level change. Edge has designed this product to produce voltage signals between 1v, 2v, 3v, 4v, and 5v, right from your Insight, allowing for tune changes without the need for a separate switch.

Easily change custom tunes from the Insight CS2 or CTS2 monitor in your 2011-2014 Ford 6.7L Powerstroke with the Edge Products 98650 EAS Shift-On-The-Fly Accessory. Forget having to drill a hole in your dash for a manual switch. Tunes can be conveniently changed right from the screen of your Insight. Many tuning companies utilize a voltage signal to prompt a custom tune level change. Edge has designed this product to produce voltage signals between 1v, 2v, 3v, 4v, and 5v, right from your Insight, allowing for tune changes without the need for a separate switch.

Easily change custom tunes from the Insight CS2 or CTS2 monitor in your 2011-2016 GM 6.6L Duramax with the Edge Products 98653 EAS Shift-On-The-Fly Accessory. Forget having to drill a hole in your dash for a manual switch. Tunes can be conveniently changed right from the screen of your Insight. Many tuning companies utilize a voltage signal to prompt a custom tune level change. Edge has designed this product to produce voltage signals between 1v, 2v, 3v, 4v, and 5v, right from your Insight, allowing for tune changes without the need for a separate switch.